1. Environment and Requirement
-Requirement for place of chair inspection:Light from a power of at least 500 Lux.
-Perspective:The products must be tested by every angle.
-Distance of viewing:In doubts, check the products from a distance of 30 cm. If it is not visible, it is no defect. View the items by various angles.2.Defect Description
-Not permitted any sharp point/sharp edge on accessories.
-Not permitted infestation of live insect.
-Not permitted needle detected.
-Not permitted mildew products.-Not permitted heavily odor.
-Not permitted fabric flaw,hole,neps/pills on surface ,printing fault,creases,wrinkle etc.
-Not permitted irregular stitches,loose/tight stiches,crooked stitches,skipped stitches,unsecure stitches,broken stitches,run-off stitches etc.
-Not permitted open seam,abasion feed mark,scratch mark.
-Not permitted rust,pell off coating on accessories.
-Not permitted materail fraying.
-Not permitted uncut thread ends.
-Not permitted torn/damaged surface.
-Not permitted crease mark,burn mark,water spot,color stain,oil stain,dirty mark etc.
3.Field Test & Measurement
-Color shade check
-Function check
-Smell check
-Product dimension check
-Product weight check
-Barcode readability check
-Product performance check
-Rub test
-Tape test
-Loading test
-Wobble check
-Quantity per carton check
-Carton dimension check
-Carton gross weight check
-Carton drop test