Teencher Inspection Co.,Ltd
-
Call Us :
0086-591-87915385 -
Email :
sales@tc-inspection.com
Call Us :
0086-591-87915385Email :
sales@tc-inspection.com
1.Inspection Environment and Requirement
-Requirement for place of inspection:Light from a power of at least 500 Lux.
-Perspective:The products must be tested by every angle.
-Distance of viewing:In doubts, check the products from a distance of 30 cm. If it is not visible, it is no defect. View the items by various angles.2.Defect Description
-Not permitted any sharp point/sharp edge on accessories.
-Not permitted infestation of live insect.
-Not permitted blood mark
-Not permitted mildew products.-Not permitted heavily odor.
-Not permitted missing any parts or accessories etc.
-Not permitted crack mark,chipped edge,burr, dent mark,scratch mark etc.
-Not permitted any rust mark.
-Not permitted wrong printing,missing printing etc.
-Not permitted unreasonable gap
-Not permitted burn mark,water spot,color stain,oil stain,dirty, impurity mark etc.
3.Field Test & Measurement
-Color shade check
-Function check
-Smell check
-High voltage check
-Earth resistance test
-Power consumption check
-Product dimension check
-Product weight check
-Barcode readability check
-Water tank capacity check
-Rub test
-Tape test
-Stability check(10°, unfavorable position, no over turn)
-Noise level check
-Power cord pull test
-Power on check
-Fan speed check
-Motor speed check
-Motor starting (low voltage) test
-Temperature rise test
-Moisture resistance test
-Leakage current test
-Abnormal operation test
-Construction test
-Mechanical strength test
-Distance of remote controller check
-Product performance check
-Water leakage check
-BTU test
-Salt Spray Test
-Air volume check
-Internal check
-Protection against access to live parts test
-Quantity per carton check
-Carton dimension check
-Carton gross weight check
-Carton drop test
IPv6 network supported 
