Electrical product inspection electronic product inspection service

1.Inspection Environment and Requirement

-Requirement for place of inspection:Light from a power of at least 500 Lux.

-Perspective:The products must be tested by every angle.

2.Visual Non­Conformities Standard

Visual non­conformities as stated below are typical defects during production and must be handled either by means of suitable measuring or comparison practices. A practical method is to compare defects either against the specification guide or against provided samples.

-Not permitted any sharp point/sharp edge.

-Not permitted infestation of live insect.

-Not permitted blood mark

-Not permitted heavily odor.

-Not permitted crack mark,chipped edge,burr, dent mark,scratch mark etc.

-Not permitted any rust mark.

-Not permitted malfunction,noise etc.

-Not permitted wrong printing,missing printing etc.

-Not permitted unreasonable gap

-Not permitted burn mark,water spot,color stain,oil stain,dirty, impurity mark etc.

3.Field Test & Measurement

-Function check

-Smell check

-Hi-pot test for adaptor

-Earth resistance check

-Power consumption check

-Assembly check

-Color test

-Computer software check

-Product dimension check

-Product weight check

-Barcode readability check

-Power on  check

-Power cord pull test

-Power cord length check

-Rub test

-Tape test

-Quantity per carton check

-Carton dimension check

-Carton gross weight check

-Carton drop test