Fabric is the material used to make clothing. As one of the three elements of clothing, the fabric can not only interpret the style and characteristics of the clothing, but also directly affect the color of the clothing and the performance effect of the shape.
Teencher Inspection team consists of professional quality control and international trade experts, each member with extensive inspection experience and very strong sense of service. our inspection can help you to reduce logistics costs, return risk, complaints, compensation and potential brand reputation due to quality problems.
1.Inspection Environment and Requirement
-Requirement for place of fabric quality check:Light from a power of at least 500 Lux.
-Perspective:The products must be tested by every angle.
-Distance of viewing:In doubts, check the products from a distance of 30 cm. If it is not visible, it is no defect. View the items by various angles.
2.Inspection Environment and Requirement
-Standard Adopted:Visual Inspecting and Grading Fabric,ASTM D5430-04 Dated 94704 ( 4 Point System )
-Acceptable shipment point count /100sq. yards :16
3.Visual NonConformities Standard
Visual nonconformities as stated below are typical defects during production and must be handled either by means of suitable measuring or comparison practices. A practical method is to compare defects either against the specification guide or against provided samples.
-Not permitted infestation of live insect.
-Not permitted needle detected.
-Not permitted mildew products.-Not permitted heavily odor.
-Not permitted fabric different from the Spec.
-Not permitted fabric flaw,hole,torn,neps/pills on surface ,printing fault,crease.
-Not permitted abasion feed mark.
-Not permitted crease mark,burn mark,water spot,color stain,oil stain etc.
4.Field Test & Measurement
-Color shade check
-Smell check
-Hand feel check
-Fabric width check
-Cuttable width check
-Conversion yards check
-Fabric weight check(gsm)
-Barcode readability check
-Rub test
-Roll dimension check
-Roll gross weight check