High heels are a particularly high heel that makes the heel significantly higher than the toes. There are many different styles of high heels, especially in the heel changes, such as fine heel, thick heel, wedge heel, nail heel, mallet heel, knife heel, etc.
Teencher Inspection team consists of professional quality control and international trade experts, each memberwith extensive inspection experience and very strong sense of service. our inspection can help you to reduce logistics costs, return risk, complaints, compensation and potential brand reputation due to quality problems.
1.Inspection Environment and Requirement
-Requirement for place of inspection:Light from a power of at least 500 Lux.
-Perspective:The products must be tested by every angle.
-Distance of viewing:In doubts, check the products from a distance of 30 cm. If it is not visible, it is no defect. View the items by various angles2.Visual NonConformities Standard
Visual nonconformities as stated below are typical defects during production and must be handled either by means of suitable measuring or comparison practices. A practical method is to compare defects either against the specification guide or against provided samples,shoes inspection checklist:
-Not permitted any sharp point/sharp edge on accessories.
-Not permitted infestation of live insect.
-Not permitted needle detected.
-Not permitted mildew products.-Not permitted heavily odor.
-Not permitted cementing comes off,Bonding gaps.
-Not permitted excess glue,loose seat or skew seat
-Not permitted fabric/leather flaw,hole,neps/pills on surface ,printing fault,creases,wrinkle etc.
-Not permitted irregular stitches,loose/tight stiches,crooked stitches,skipped stitches,unsecure stitches,broken stitches,Run-off stitches,pleated seam,puckering seam,etc.
-Not permitted open seam,abasion feed mark,scratch mark.
-Not permitted detached decoration/accessories.
-Not permitted materail fraying.
-Not permitted asymmetry/uneven vamp,length,height etc.
-Not permitted uncut thread ends.
-Not permitted poor printing or missing printing etc.
-Not permitted torn/damaged surface.
-Not permitted distorted,skew/deformation of shoe shape.
-Not permitted crease mark,burn mark,water spot,color stain,oil stain,dirty mark etc.
3.Field Test & Measurement
-Color shade check
-Pick and pull check
- Nail check(touch inner of the shoes by hand)
-Smell check
-Mildew check
-Labeling check
-Size measurement
-Barcode readability check
-Rub test
-Tape test
-Flexing check
-Wearing check
-Destroy check for high heel
-Carton assortment check
-Carton dimension check
-Carton gross weight check
-Carton drop test