1. Inspection Environment and Requirement
-Requirement for place of inspection:Light from a power of at least 500 Lux.
-Perspective:The products must be tested by every angle.
-Distance of viewing:In doubts, check the products from a distance of 30 cm. If it is not visible, it is no defect. View the items by various angles.2.Defect Description
-Not permitted any sharp point/sharp edge on accessories.
-Not permitted infestation of live insect.
-Not permitted blood mark
-Not permitted heavily odor.
-Not permitted chipped mark,burr mark, dent mark,scratch mark,wrinkle mark etc.
-Not permitted rust mark.
-Not permitted wrong stamp,missing stamp etc.
-Not permitted water spot,color stain,oil stain,dirty, impurity mark etc.
3.Field Test & Measurement
-Color shade check
-Smell check
-Pick and pull check
-Wobble check
-Product dimension check
-Product weight check
-Barcode readability check
-Handle strength test
-Handle temperature check
-Material thickness check
-Coating thickness check
-Product performance check
-Rub test
-Tape test
-Quantity per carton check
-Carton dimension check
-Carton gross weight check
-Carton drop test