Laundry basket inspection quality control for laundry basket

1.Inspection Environment and Requirement

-Requirement for place of inspection:Light from a power of at least 500 Lux.

-Perspective:The products must be tesed by every angle.

2.Visual Non­Conformities Standard

Visual non­conformities as stated below are typical defects during production and must be handled either by means of suitable measuring or comparison practices. A practical method is to compare defects either against the specification guide or against provided samples.

-Not permitted infestation of live insect.

-Not permitted needle detected.

-Not permitted heavily odor.

-Not permitted fabric flaw,hole,neps/pills on surface ,printing fault etc.

-Not permitted irregular stitches,loose/tight stiches,crooked stitches,skipped stitches,broken stitches,run-off stitches,pleated seam,puckering seam, wave stitches etc.

-Not permitted open seam,abasion mark.

-Not permitted uncut thread ends.

-Not permitted crease mark,burn mark,water spot,color stain,oil stain etc.

3.Field Test & Measurement

-Color shade check

-Function check

-Smell check

-Product dimension check

-Product weight check

-Barcode readability check

-Handle strength check

-Rub test

-Tape test

-Waterproof check

-Quantity per carton check
-Carton dimension check

-Carton gross weight check

-Carton drop test