1.Inspection Environment and Requirement
-Requirement for place of inspection:Light from a power of at least 500 Lux.
-Perspective:The products must be tested by every angle.
-Distance of viewing:In doubts, check the products from a distance of 30 cm. If it is not visible, it is no defect. View the items by various angles.2.Defect Description
-Not permitted any sharp point/sharp edge.
-Not permitted infestation of live insect.
-Not permitted blood mark.
-Not permitted burr,crack,chipped,hole etc.
-Not permitted grease,dirt, Impurity,fingerprints etc.
-Not permitted small brifht/white dots,dent mark,scratch mark.
-Not permitted assembly or fitting defect.
3.Field Test & Measurement
-Color shading check
-Function/Fitting check
-Smell check
-Product dimension check
-Product weight check
-Gas qty in chamber check
-Flame Max. height check
-Barcode readable check
-Inflation test
-Unit drop test
-High temperature test
-Trigger press check
-Quantity per carton check
-Carton dimension check
-Carton weight check
-Carton drop test